| |
 |
 |
 |
|
Inlay not perfectly round |
January 31, 2022 |
| Reviewer:
David Cohoon from Orem, UT United States
|
|
MQ-376M is a 4" circle inlay. I used a thick plastic template with several hole sizes. Used the 4" hole and routed a very shallow hole in a test wood workpiece. Found that the inlay was not round. Measured with a rule and found that the inlay was 1/16" short on one diameter. So I routed a slightly smaller diameter hole to accommodate the smaller diameter of the inlay. Then I tried to gently sand the edges of the inlay that was actually 4" in diameter to fit the slightly smaller hole. The inlay, because of it's thinness and brittleness, kept breaking and falling apart. I ended up using it on the real workpiece and looks terrible so I am going to have to chisel out the inlay and figure out what to do with this slightly smaller 4" hole in my workpiece.
Was this review helpful to you? 
|
|
 |
|
 |
|